First Look At The Neutron RDA by Wismec and Jay-Bo Designs


Wismec Neutron Interchangeable Two Post RDA - Jay Bo Designs
Wismec Neutron Interchangeable Two Post RDA – Jay Bo Designs

Are you looking to buy a new RDA?

Are you into big, stout RDA’s with top airflow?

Do you have a good understanding of standard and series builds in terms of vaping?

If you answered yes to these questions, then the Neutron Interchangeable Two-Post RDA might be the answer to your vape prayers!

Vapor DNA just came with this new RDA on their site so let’s see if the Neutron is what you’ve been looking for!

The Neutron is built from Stainless Steel and has a nice, clean look to it

The Neutron RDA size and look

This is Wismec’s newest RDA and they decided to come out big! It’s a nicely built huge 25mm wide RDA made of Stainless Steel. It has a bigger than usual 21mm wide internal space so get creative with your coil builds because space is no issue with the Neutron. It also has a 5mm deep juice well which gives you a lot of room for wicking and less need for dripping e-liquid. Speaking of dripping, the Neutron has a very wide 12mm wide bore drip cap which you can easily take off and put back on. The rugged linings and deep engravings give the Neutron a very masculine look and feel.

Rugged lines and deep engravings give the Neutron RDA a more aggressive look
Rugged lines and deep engravings give the Neutron RDA a more aggressive look

Cool feature of the Wisemec Neutron RDA

You’re probably wondering what the difference is between the 2 post configurations in the Neutron RDA. Here it is in the easiest way I know to explain it.

Basically when you use the series coil post configuration, you can use large surface configurations without going lower in resistance, granted you know what you are doing.

What happens when you run a serial coil build properly

In other words, that’s like you using a serial dual coil build, but the resistance is showing that you have only one coil in your build. Less resistance = more battery power for you!

 

Notice how you can change the post configurations? Nice!

Lots of airflow

The Neutron has something they call the Vortex Airflow System, which are six 2.5mm air holes on the top that are funneled down into the chamber which results in tremendous vapor and flavor production. Unfortunately, it isn’t adjustable. This is for the vapers who love airy hits and open air flow.

Those are 6 2.5 mm air holes blowing directly into your chamber. And look at that gigantic drip tip.

The Neutron RDA is a huge RDA with lots of space and post configurations for coil builders. The main feature of the Neutron is something intermediate and advanced vapers would appreciate. If executed right, you can get the same insane vapor and flavor production with less strain on your battery.

The Neutron is a big, tough built RDA with lots of room in it!

If you are interested in buying the Neutron RDA, Vapor DNA has it listed right now for $34.99 which isn’t bad at all considering you are getting a very well built RDA that has a neat feature that I don’t recall any other RDA having.

These Flavor RDA’s Will Make Your E-Juice Taste Much Better Than Before


best rdas for flavor

Vapers are getting over their “cloud chasing” phase and are starting to pay more attention to rebuildable dripping atomizers that are geared towards flavor instead of vapor production.

With the growing complexity of e-juice flavors coming out on the market, RDA makers have turned their attention to flavor enhancement.

For the growing number of flavor vapers who want a way to really bring out the “realness” in e-juice flavor, here’s a list based on the recommendations by current users of this product. These are highly recommended by seasoned flavor chasers.

There’s a big difference between “honey glazed donuts,” with “freshly baked, rightly sweetened honey glazed donuts with a hint of cinnamon.”

These are what the following RDA’s do, they bring out crispness in flavor and those other notes you would’ve never tasted with a cloud-chasing dripping atomizer

These are perfect for people who do their own builds, and enjoy the mouth to lung (MTL) vaping style. Get any of these flavor RDA’s and you’re gonna taste e-juice like you’ve never tasted it before!


NarDA RDA

NarDA RDA – The NarDA (Nar-dee-ay) comes highly recommended from flavor chasers. If you ever try asking for recommendations for flavor RDA’s, the NarDA is likely to be mentioned.

Its simple design and quality build does something that many drippers out there fail to do and that’s turn whatever juice you use it into a flavorful vape on steroids.

A great mouth to lung RDA, the NarDA is a simple 22mm with a two-post deck with big screws which can accommodate Clapton and braided wires, but isn’t meant for thick Juggernaut coils. Did I mention it was a great flavor RDA already?

cooltext214114360748983


Hobo V3.1 RDA

Hobo V3.1 – Another highly recommended 22mm flavor RDA is the Hobo V3.1. It’s a great MTL piece that has both dual and single air flow options.

Has a deep juice well while the airflow is smooth with good air flow control. The 3mm holed wide posts can accommodate thick wires which are held in place by Allen key screws. It’s simple 2 post deck makes building easy.

cooltext214113986369296


Petri RDA

Petri RDA – The Petri RDA continues to be a favorite among flavor chasers. The design just stands out and the air flow on this is one of the best.

The Petri is a lot similar to the two RDA’s mentioned earlier: 22mm, 2 post deck, nice MTL type of dripper for those who like a tighter draw. That gold and black finish makes it a vape beauty!


goon rda

Last on the list is this beefy 24mm wide RDA, the Goon. It’s sets itself apart from the previously mentioned RDA’s. The Goon is meant to pair well with bigger sized mods.

The clamp styled post makes coil building a lot easier and allows for fat, thick coils. It also has more airflow options than the others on the list.

cooltext214112869036055

cooltext214112379640185

cooltext214111967398442


All of the RDA’s mentioned above came highly recommended by a group of vapers who love flavor with each one promising to be the best flavor enhancing vape accessory you can invest in.

2 Wicking Methods That Eliminates Dry Hits


scottish roll wicking method

Hey everyone, I came across 2 videos on YouTube that I’m sure a lot of you vapers who do their own builds will find useful.

As you know, I hate dry hits. There’s nothing more that kills my vaping more than a big hit of dry burnt cotton. It’s been a common problem for pretty much anyone who vapes.

I’ve been looking into ways on how to solve this problem for myself, and I wanted to share with you all  these two wicking methods which promises to eliminate dry hits from your vaping!

There are a lot of reasons why we experience dry hits, I covered that in a previous post here on my blog. Aside from having not enough juice in your cotton, most dry hits are caused by improper wicking.

When you cotton isn’t saturated enough with e-juice, you get that dry taste in your vape. So basically what you would need to do is find a way to make your cotton absorb e-juice better.

Here are two videos I came across teaching you how you should wick your coils in order for it to be more absorbent therefore eliminating dry hits.


  1. Scottish Roll

2. Sushi Roll


Hopefully these two wicking methods helps you coil builders out there get rid of those dreaded dry hits which we all hate.